tel: 0121 559 8666

Birmingham Garage & Industrial Doors Ltd

Birmingham Garage & Industrial Doors ltd, Punched & Glazed Roller Shutter Doors, Powder Coating Finish.Ideal for additional Shop Front Security.

An aluminium lath, punched and glazed, roller shutter door, allowing greater freedom for flexibility of shop front design and layout, by increasing or reducing the level of glazing in the shutter curtain area. Considered to be of more attractive appearance than the galvanised steel lath of other types of shop front shutter.

Curtain: 90 mm. deep high quality extruded aluminium bottom rail 82 mm. deep x 60 mm. wide complete with neoprene weather strip.

Punching: Can be solid, but more usually, punched as follows - in-line & brickbond – 152 mm. wide x 59 mm. high double in-line  -  330 mm. wide x 59 mm. high

Glazing:  Achieved by using 2 mm. thick polycarbonate

Guide Channels: 65 mm. deep x 45 mm. wide aluminium complete with 3 no. hard wearing glide strips to each side.

Canopy / Fascia: Manufactured from 0.9 mm. (20g) galvanised sheet steel folded and formed to enclose head plates and barrel assembly.

Operation: Manually through counter balanced spring barrel operated by gear cranked mechanism, or electrically by single phase tubular mounted motor, complete with fail safe safety brake and anti drop mechanism, and with a variety of low voltage controls.

Finish: Either mill finish aluminium, anodised finish or more popularly, fully factory powder coat paint finished to RAL standard colour.