tel: 0121 559 8666

Birmingham Garage & Industrial Doors Ltd

Birmingham Garage & Industrial Doors ltd, Industrial Folding Shutter Doors, Galvanised Steel, Powder coated

A fully all galvanised steel construction folding shutter door, designed, manufactured and installed to suit specific site dimensions and requirements. Minimal headroom requirements allow this type of door to be used when headroom limitations preclude the use of a traditional roller shutter door.

All BGID Sultan Industrial Folding Shutter doors are manufactured to individual site dimensions.                                   

General Sultan Folding Shutter Specification:

Door Leaf: Cold rolled from 0.9 mm. galvanised steel - vertically ribbed for strength.

Picket, Hinge, Slide Section & Lattice Bar:  All manufactured from cold rolled galvanised steel - thicknesses varying from 1.2 mm to 2 mm. as required.

Top & Bottom Track: Manufactured from 2 mm. and 3 mm. cold rolled galvanised steel respectively - the top track supplied with supporting brackets to suit site conditions.

Trolley Assembly: All steel, zinc plated construction with pre-lubricated ball race assemblies - attached to top of picket section.

Bottom Guide: Manufactured from zinc plated steel - fixed to base of picket section, and acts as support for each pair of leaves.

Operation: Usually manual, with suitable locking arrangements, but for larger and therefore heavier doors, powered operation, with single or 3 phase motors coupled with a variety of control systems are available.